The microphone is the best component for sound recording, voiceovers, and more. But if you need to get the desired sound quality from your microphone, then this tutorial is for you.
If your microphone has a few issues, we’ll share 6 easy steps to make your microphone sound better.
So, without wasting your valuable time, let’s dive into the tutorial:
Step 1: Microphone Positioning
Microphone Positioning plays a top role in how good audio you get from your microphone. Remember, the closer your microphone is to your mouth, the better it will pick up your voice and produce clear sound quality.
If your microphone is unstable on your desk, consider getting a microphone stand or an arm to position your microphone at the right height and angle. You’ll find a lot of budget-friendly microphone stands and arms online.
To get the best audio from your microphone, keep it 3-6 inches from your mouth. This distance is ideal for capturing your voice without unwanted noise or distortion.
If you can use a pop filter, it will greatly enhance the sound quality of your microphone. A pop filter helps to reduce plosives and wind noise that can occur when pronouncing words with hard consonants like “p” or “b”.
And you sure want to know the best position of your microphone. The cardioid pattern is the most commonly used for microphones and picking up sound from one direction. So, ensure you’re speaking directly into the front of the microphone for optimal sound quality.
Step 2: Adjusting Gain For Correct Levels In OBS Studio
OBS Studio is the best Software for recording and streaming audio. It has a microphone gain control feature that allows you to adjust the input level of your microphone.
Adjust the gain so it’s not too low or too high to make your microphone sound better. Test your voice while adjusting the gain until you get a clear and consistent audio signal without distortion.
Ensure you perfectly set up your microphone on Mic/Auxiliary Audio from the Global Audio Devices.
Step 3: Noise gate/Expander
Noise gate/ Expander is essential for removing background noise while recording with a microphone. The noise gate will mute any sound below a certain threshold while the expander boosts the volume above a specific level.
Firstly, you need to click on the Gear icon from your OBS studio and then click on Filters.
Then, you need to click on the Plus (+) icon and click on the Expander.
Expander helps you remove all the unwanted noise from your microphone and make all the quiet sounds quieter.
This is the perfect setting for the Expander, allowing your microphone to pick up sound when speaking, reducing background noise, and improving overall sound quality.
Step 4: Equalizer (EQ)
First, you must download software to add Equalizer to your OBS studio. You can download the software from here.
After installing the software on your computer, you need to click on the Plus (+) icon and then click on the VST 2.x Plug-in.
You can adjust the different frequencies on your microphone to make it sound better using a graphic EQ. The equalizer allows you to boost or reduce specific frequencies and fine-tune the overall sound quality of your microphone.
Step 5: Compressor
The compressor is the best way to make your microphone sound better. The compressor balances the volume of your voice, making it more consistent and clear throughout the recording.
To add a compressor to your OBS studio, click the Plus (+) icon and select Compressor.
Here’s the perfect setting for the compressor in OBS Studio. Take a look and adjust it as needed for your microphone. Now, you have the perfect audio quality from your microphone.
Step 6: Limiter
To add Limiter to your OBS studio, click the Plus (+) icon and select Limiter.
After adding the Limiter to your OBS studio, you must follow the same setting as the image. This will prevent sudden loud noises from distorting your microphone’s audio and produce a consistent sound.
FAQ
You can improve your microphone sound quality by changing the microphone position, using a pop filter, adjusting gain levels, and adding filters like noise gate/expander, EQ, compressor, and limiter.
You may sound bad on a microphone for several reasons, including poor positioning, inadequate gain levels, and a lack of filters to reduce background noise.
You can boost your mic sound by adjusting gain levels, using an EQ to boost specific frequencies, and adding a compressor to balance the volume of your voice. Furthermore, you can use software like OBS Studio to fine-tune your microphone settings.
Microphone sound can be better for singing by keeping the microphone 3-6 inches from your mouth, using a pop filter to reduce unwanted noise, and using an EQ to enhance vocals. Additionally, you can adjust gain levels and add filters like a compressor to produce a consistent sound while singing.
You can fix your weak mic by following the abovementioned steps, such as adjusting gain levels, using a pop filter, and adding filters like noise gate/expander and compressor.
If you want to fix your bad microphone quality, follow the abovementioned steps, such as changing the microphone position, using a pop filter, adjusting gain levels, and adding filters like noise gate/expander, EQ, compressor, and limiter.
Conclusion
Today, we talk about the 6 easy steps that help a lot to improve your microphone sound quality.
Adjusting gain in OBS Studio, using a noise gate/expander, EQ, compressor, and limiter, can make a significant difference in the overall sound quality of your microphone.
Remember to keep trying different settings until you find the perfect balance for your needs. This step-by-step guide can help you achieve optimal sound quality and make your recordings or streams more professional-sounding.
But if you need any further questions, then you can comment below. We will assist you as soon as possible.
